● Modular integration of workstations, linear layout, and maintenance channels;
● Manual feeding ( coiled pole pieces and coiled diaphragms have been prepared with pole ears ) ;
● Equipped with intelligent visual size detection, defect detection, position detection and pole piece / diaphragm alignment detection;
1. Pole piece process: automatic unwinding, automatic deviation correction, automatic tension detection and control , feeding to fixed length, mold inversion，fillet and cut off, send the pole piece to the lamination position ( there are gap detection and size detection and dust removal function in the process ), pole piece, sheet positioning, lamination ;
2. Diaphragm process: automatic unwinding, automatic deviation correction, automatic tension detection and control functions , removal of net electricity, and participation in Z stacking;
3. Cell process: sticking side glue, Hit-pot test, hot pressing, sticking QR code;
Lamination speed | ≤ 0.5 seconds / piece ( single station, blueprint cell: 390) |
Auxiliary time | ≤ 10s |
Utilization rate | ≥ 95% (due to equipment only) |
Yield | ≥ 99% (defects caused by equipment only) |
The number of stations in the whole machine | 3 stations |
Alignment | ±0.3mm (whole cell) ±0.2mm (adjacent pole piece) |
Changeover time | 2 people 1.5 days |
Replacement cost | 4--6W |
Equipment size: | 12000(L)*4500(W)*2500(H) mm |
Compatible cell range | H=150-400mm W= 80-250mm |
Chinese
EN
